搜索资源列表
AT91SAM9260-SPI-CAN
- ATMEL AT91SAM9260通过SPI控制CAN控制器程序。
atmel+spi+can+uart
- atmel单片机开发的一些基本程序，适合初学者及相关开发人员使用，含CAN,SPI,UART等基础程序
STM32 cortex m－3 的 spi驱动程序
- STM32 cortex m－3 的 spi驱动程序！ 可以直接使用！ ,STM32 cortex m-3 of the spi driver! Can be used directly!
同有SPI接口的器件进行通信对SPI接口器件的读写控制vhdl源程序
- vhdl实现spi可以同有SPI接口的器件进行通信对SPI接口器件的读写控制vhdl源程序，fpga cpld-vhdl spi can achieve devices with a SPI interface to communicate with devices on the SPI interface to read and write vhdl source code control
AVR单片机SPI接收程序
- AVR单片机SPI接收程序，改程序开发环境是CVAVR。该软件具有强大的代码生成能力，大家可以试着自己生成代码！,Single-chip SPI receiver AVR procedures, program development environment is changed CVAVR. The software is a powerful code generation capability, we can try to generate their own code!
CAN.rar
- CAN总线驱动程序，包括SPI控制,MCP2515通信芯片控制，CAN协议解析,CAN bus driver, including the SPI control, MCP2515 communication chip control, CAN protocol analysis
SPI.rar
- SPI接口在MSP430f169处理器上面的调试程序，可以通过示波器检测输出波形,SPI interface processor in the above MSP430f169 debugger can be detected through the oscilloscope output waveform
MC9S08DZ60-spi.rar
- MC9S08DZ60单片机上实现spi通信功能的一个历程。欢迎用到的朋友下载。,MC9S08DZ60单片机上实现spi通信功能的一个历程。欢迎用到的朋友下载。
W25X32
- 大容量Flash存储器W25X16,W25X32,W25X64读写擦除程序，在SST单片机上测试通过，使用了SST单片机的硬件SPI功能；也可以使用虚拟SPI的方法，在SST和STC单片机上测试通过。-Large-capacity Flash memory W25X16, W25X32, W25X64 erasable read-write procedure, SST Singlechip test is passed, the use of SST Single-chip hardware
IO-SPI
- AVR单片机IO口模拟SPI读写AT45DB081,如使用C51只有修改IO操作即可-AVR microcontroller IO port analog SPI read and write AT45DB081, such as the use of C51 can only modify the IO operation
SPI
- VHDL语言编写的SPI通信接口,可实现与单片机等外部MCU的通信,且只占用较少的引脚线-Written in VHDL SPI communication interface, can be realized with the microcontroller and other external MCU communication, and only takes less pin line
VHDL-SPI-Module.doc
- 本spi参数化通讯模块是一个支持SPI串行通信协议从协议的SPI从接口。可通过改变参数设置传输的位数，由外部控制器给定脉冲控制传输。-The parameters of spi communication module is a support SPI serial communication protocol from the agreement from the SPI interface. By changing the parameter settings can be transmit
spi
- 12位AD-MAX1241与SPI串口-MAX7219联合仿真 proteus版本：7.2 sp0 如果打不开DSN文件可以找升级包升到这个版本，或者按我下面贴的电路自己连好，max1241,max7219 Proteus 7.0以上版本的库里应该有的！本程序是网上找的，感谢那位网友，我将它共享了，希望大家下载学习；-12-bit AD-MAX1241-MAX7219 and the SPI serial version of the Joint Simulation pro
spi
- 三线spi接口，用verilog实现，作为一个模块，可以接收并行数据，然后串行发送-Three Line spi interface, using Verilog implementation, as a module, can receive parallel data, and then send the serial
Code
- DSP学习板上的例子程序包括 AD转换 CAN总线 SPI SCI -Examples of on-board DSP learning process includes the AD conversion CAN Bus SPI SCI
SPI
- 两片AT91SAM7S64间的串行通信，可以是8位或是16位，里面包含主从机的代码。-AT91SAM7S64 between two serial communication, it can be 8 or 16, which contains the main code from the machine.
SPI-Collect
- 一个spi串口 希望大家能用上 -Spi serial a hope that we can use on
SPI
- 实现SPI双机通信，SPI发送可通过DMA发送，接收可以由SPI中断接收或者DMA中断接收，也可以查询接收(To achieve SPI communication of two, send can be sent via DMA SPI, can receive the SPI interrupt receiving or DMA interrupt receiving, also can check to receive)
s5pv210-spi
- 基于S5PV210的SPI控制器设置，可以实现SPI的发送和接收数据，可以设置数据位宽(The SPI controller based on S5PV210 settings, SPI can achieve the sending and receiving data, you can set the data width)
spi final
- verilog 实现spi 串口 通过FPGA板可以看出数据传输(verilog spi can be demonstrated with FPGA)